Arm Home Blood Pressure Monitor – How To Use

Arm Home Blood Pressure Monitor – How To Use

The TempIR Upper Arm Blood Pressure Monitor is ideal for personal and domestic use. It is both safe and easy to use and can help you keep an accurate record of your blood pressure.

First you must insert the batteries, to do this remove the cover by sliding it upwards towards the centre of the monitors body, this unit uses 4 batteries, 2 of which are inserted together in the same direction with their flat negative terminal against the spring. The other 2 are inserted in the opposite direction, again with their flat negative terminal also facing against the spring. Give them a quick twist to ensure a good contact, and replace the cover by sliding it back into place.

To keep a record of your readings it is necessary to set the date and time. To do this, press and hold the “Set” button until you see the year flashing, to change the year, click the “MEM” button, each click will cause the numbers to increase. Press “Set” again for month and “MEM” to change it. Repeat the process again to select the date again changing with the “MEM” button, in this example we have set the date to October 4th, by pressing the “Set” button once again, you can adjust the hour. Holding the “MEM” button down will cause the hours to change faster, finally select the minutes and adjust them with the “MEM” button. Press “Set” again and the speaker option will flash. Select “MEM” to select Off or On. A final press of the “Set” button will turn the unit off and the settings will be remembered.

Blood pressure is usually measured in units of MMHG, which historically means millimetres of mercury. This monitor can also display readings of KPA which is kilopascals. To select which units you want to display press and hold the “on/off” button for longer than 5 seconds until the screen changes, click “MEM” to select and a final “Set” to store the change.

  • facebook
  • googleplus
  • Twitter
  • Tumblr
  • Pinterest
  • linkedin
  • Stumble